Skip to main content

Add anything else to an inspection

Add as many of your own items as you like before you finish, each with a measurement, an answer, notes and photos, and have them remembered for next time.

For: Pool safety inspectors · Last updated 13 November 2026

What it is

Anything else is the last screen before you finish an inspection, for things the checklist does not ask about: a pool pump cover, a light, a spa lid.

Read more

Each item has what you checked, what you measured, an answer, notes and photos, and there is no limit on how many you add.

Who it is for

Inspectors. It is on professional inspections, not on a homeowner's self-check.

How to do it

  1. Answer the last checklist question and press Save & next: Anything else opens by itself.

    You can also press Anything else in the list beside the checklist, or open it from Review and finish.

  2. Type what you checked under What did you check? and press Add item.

  3. If you measured something, type it under What was measured and choose mm, cm or m.

  4. Choose an answer: Pass, Fail, Unable to verify or Not applicable, the same four as on every checklist item.

    Press it again to clear it.

  5. Write notes if you want them.

    They save when you leave the box.

  6. Press Take photo or Upload to add photos to the item.

    Photos are saved with the item.

Show the other 2 steps
  1. Tick Remember this for my next inspections and the item is added, unanswered, to your next inspections.

    It starts unticked, because most items you type are one-offs. Untick it on an item to stop remembering it.

  2. Press Review & finish when you are done.

    Nothing to add? Press it straight away.

Tip: Tick Remember this for my next inspections to add the item, unanswered, to your next ones. It starts unticked.

Good to know: Anything else does not work with no signal.

The Anything else step on a phone with example data, as the article explains it: a list for items the checklist did not ask about, with an example item and its answer buttons.
Example screen with made-up names and data.

What is remembered

Only the name of the item is remembered, never the result, the notes or the photos. On your next professional inspection the remembered items are already there, unanswered, ready to fill in. Removing a remembered item from one inspection takes it off that inspection for good, and it still comes back on new inspections.

Read more

To stop that too, press Also stop remembering it after removing it, or untick Remember on the item first.

In the report and the record pack

Your items appear in the PDF report under Anything else, with their measurement, answer, notes and photo numbers, and in the record pack with their photos. An item marked Fail becomes a task when you finish. An item you did not answer is reported as Not answered.

These items are your own record. They never change the overall result of the inspection.

No signal

Anything else needs a connection. Answers and photos on the checklist itself keep working with no signal; add your extra items once you are back in range.

What it does not do

  • It does not change the overall result of the inspection.
  • It does not remember results, notes or photos, only the name of the item.
  • It does not work with no signal.
  • It is not on a homeowner's self-check.

Common questions

Is there a limit to how many items I can add?

No. Add as many as you need on each inspection.

Why did an item appear that I did not add?

It is on your remembered list from an earlier inspection. Remove it from this inspection, then press Also stop remembering it if you do not want it again.

Can I add an item after I finish?

No. A finished inspection is read-only. An administrator can reopen it if you need to change it.

PoolPreCert helps you do and record your work. It does not decide whether a pool meets the Queensland standard. Only a licensed pool safety inspector does that.

Was this helpful?

YesNo, tell us what was missing

This opens an email to the PoolPreCert team. Please do not include passwords or personal details.

Still stuck? Contact support

Email support@poolprecert.com and tell us what you were trying to do and which screen you were on. Please do not send passwords or card numbers. The PoolPreCert team will reply.

Email support

All Help Centre articles