Clock on, breaks and weekly timesheets
Staff tap Clock on, Start break and Clock off on their phone. Owners and admins check each week, edit hours if needed, then approve and lock it.
For: Pool safety inspectors, Pool fence contractors, Pool builders · Last updated 21 November 2026
What it is
Each person taps when they start, take a break and finish. PoolPreCert adds the taps up into a weekly timesheet, and an owner or admin approves it.
Who it is for
Owners, admins and inspectors have their own clock. Only owners and admins see everyone's hours. A viewer has no clock.
How to do it
Press Clock on, the button at the top of your dashboard just above Add a job (the Clock on page in the menu has the full card).
To count the hours against a job, press Start my time on that job, or choose it on the Clock on page first. If the job has a crew, each person clocks on to it themselves.
Moving to another job without clocking off: while you are working, choose the next job under Moving to another job? and press Switch job.
More detail
The first job's time stops and the next one's starts at once. Two people can be clocked on to the same job. The job's page shows Time on this job: the total, each person's share and who is clocked on now. Breaks are not counted, and staff see only their own time there.
On the job's page, Start my time on this job starts a timer without leaving it and Stop my time ends it. Owners and admins can press Start everyone on this job (it uses the person the job is assigned to and its crew; anyone already on another job is left as they are) and Stop everyone.
Add time that wasn't started adds a missed stretch, such as 12:00 to 1:30 yesterday, for anyone (owner or admin) or for yourself when the owner lets staff edit their own hours; it is kept on the timesheet with who added it.
Press Start break when you stop for a break and End break when you are back.
Press Clock off when you finish. Each tap is saved with the time on PoolPreCert's clock, so the time can't be typed in.
Your week shows each day's taps, your break time and your hours, with a total.
If something is wrong, scroll to Something wrong?, choose what to fix, give a reason and send it. A tap you made is never overwritten: your manager approves a correction and the fix is added alongside it.
Owners and admins: open Team timesheets, pick a week with Previous and Next, and look at each person.
More detail
Decide any corrections waiting. To change someone's hours yourself, or clock them on or off, open Edit hours or clock them on or off under their name, choose what to add, change or remove, and give a reason: it saves at once and they see who changed it. Then press Approve and lock for each person, or Approve all ready.
Download spreadsheet gives one line per person in hours.
To change an approved week, the owner presses Unlock this week and says why.
It is recorded. Make the corrections, then approve the week again.
Good to know: Nobody edits a tap. A wrong or missing time is a correction your manager approves, and the original stays on the record.
What counts as a missing clock off
If a shift is still open after 16 hours, PoolPreCert treats it as a forgotten clock off. It is flagged, it is not counted, and the week can't be approved until a correction adds the missing time. Clocking on again starts a new shift.
Days and weeks
Days and weeks use Brisbane time, Monday to Sunday. A shift that runs past midnight is split at midnight. A week can be approved once Sunday is over.
What it does not do
- Times are as recorded by the person who tapped. PoolPreCert does not track location and does not check where anyone is.
- It does not work out pay, overtime, leave or tax, and it does not send hours to payroll software yet. It gives you hours per person per week to use however you pay.
- An admin can't approve their own week, decide their own correction or edit their own hours. The owner can.
- The owner can switch Clock on and timesheets off for the whole business under Settings, Team tools. Nothing is deleted, and it comes back when switched on.
- Staff can only fix their own times at once if the owner turns on Let staff edit their own hours under Settings, Team tools. It is off until then.
Common questions
Can a staff member see someone else's hours?
No. Each person sees only their own taps, hours and requests. Owners and admins see everyone's.
I forgot to clock off. What do I do?
Choose I forgot to tap, pick Clock off and the time you finished, and say why. Your manager approves it and your hours are counted.
PoolPreCert helps you do and record your work. It does not decide whether a pool meets the Queensland standard. Only a licensed pool safety inspector does that.
Related articles
Team members and what each role can do
Invite people by email, choose owner, admin, inspector or viewer, switch between businesses and see what each role can do.
Schedule basics: jobs, the calendar and reminders
How the Schedule works: the week board, adding and moving jobs, jobs with no time yet, repeating jobs, confirmation emails and starting a quote or invoice.
Was this helpful?
YesNo, tell us what was missing
This opens an email to the PoolPreCert team. Please do not include passwords or personal details.
Still stuck? Contact support
Email support@poolprecert.com and tell us what you were trying to do and which screen you were on. Please do not send passwords or card numbers. The PoolPreCert team will reply.
